Roland VS-1680 User Manual

Page 17

Transport Control buttons

[SHIFT] + [STORE(ZERO)]:

Store song data to the disk drive

[SHIFT] + [SONG TOP(REW)]:

Move to the time where the first sound of the song is recorded

[SHIFT] + [SONG END(FF)]:

Move to the time where the last sound of the song is recorded

[SHIFT] + [SHUT/EJECT(STOP)]:

Shut down

[SHIFT] + [RESTART(PLAY)]:

Restart (after shut down)

[REC] + STATUS buttons:

Switch the status to REC (indicator blinks red)

[STOP] + STATUS buttons:

Switch the status to PLAY(indicator lights green)

LOCATOR/SCENE buttons

[CLEAR] + LOCATOR buttons(1–8):

Clear the setting of locators

[CLEAR] + [TAP]:

Erase a marker

[SHIFT] + [CLEAR] + [TAP]’[YES]:

Erase all markers

[BANK] + LOCATOR buttons(1–8):

Switch the locator bank

[SCENE] + [TAP]:

Execute snapshot (When Automix is “on”)

[SCENE] + [PREVIOUS]:

Gradation to mixer setting of previous marker (when Automix is “on”)

[SCENE] + [NEXT]:

Gradation to mixer setting of next marker (when Automix is “on”)

[SCENE] + [REC]:

Automix Realtime recording (when Automix is “on.”)

[SHIFT] + [SCENE]:

Transmit the condition of the digital mixer as MIDI data from MIDI OUT
connector

[SHIFT] + [START(1)]:

Enter the current time as track edit start point. If it has been already set,
move to that time (except track condition).

[SHIFT] + [END(2)]:

Enter the current time as track edit end point. If it has been already set,
move to that time (except track condition).

[SHIFT] + [FROM(3)]:

Enter the current time as track edit from point. If it has been already set,
move to that time (except track condition).

[SHIFT] + [TO(4)]:

Enter the current time as track edit to point. If it has been already set,
move to that time (except track condition).

[SHIFT] + [CLEAR] + [START(1)]:

Clear the track edit start point (except track condition)

[SHIFT] + [CLEAR] + [END(2)]:

Clear the track edit end point (except track condition)

[SHIFT] + [CLEAR] + [FROM(3)]:

Clear the track edit from point (except track condition)

[SHIFT] + [CLEAR] + [TO(4)]:

Clear the track edit to point (except track condition)

[SHIFT] + [PREVIOUS]:

If there is a phrase on current time, move to the beginning of that phrase.
If not, move to the end of the previous phrase (when PREVIOUS/NEXT
Sw is “MARKER”). Move to the previous marker (when
PREVIOUS/NEXT Sw is “PHRASE”)

Special Key Operations