Roland ATELIER Combo AT-350C - Manual (Page 99)

99
Detailed S
ettings f
or
Various F
unc
tions
Muting Individual Channels of Performance
Data (Channel Mute)
You can mute (silence) individual channels of performance data of SMF
music files (commercially available).
1. Press the [Utility] button.
2. Press the Menu [
] [ ] buttons to select “Channel Mute.”
3. Press the Value [-] [+] buttons to select the channel that you
wish to mute.
From the left, these are “1 Ch. (channel 1), 2 Ch. ... 15 Ch., and 16 Ch.”
4. Press the [Utility] button.
The number will change to “–,” indicating that the corresponding
channel has been muted.
5. Once again press the [Utility] button, and muting will be
canceled.
To return to the basic screen, press the [Display/Exit] button.
MEMO
Channel mute will be defeated when you select different
performance data.
Adjusting the Audio Recording Volume
(Audio Rec Gain)
This adjusts the volume for audio recording.
Value -24 dB–6 dB
Switching the Display of Lyrics On or Off
(Lyrics)
Some music files have Lyrics included and these Lyrics can be
displayed on the screen. You can turn on or off the lyrics display of
such music files.
Value Explanation
ON Lyrics will be displayed.
OFF Lyrics not will be displayed.
* If you press a voice select button while playing back music files that
contains lyrics, the display screen will switch, and the lyrics will no
longer be displayed. To re-display the lyrics, press the [Rec] button.
Setting the Type of CD to be Played Back
(CD/Audio Type)
The ATELIER may be unable to correctly recognize the type of CD being
used. In such instances, you can specify the type of CD manually.
Value Explanation
AUTO The CD type is detected automatically.
TYPE A
General CDs for Player Piano contain audio and
MIDI data, and the data format may vary from
one CD to the next. If the CD’s data format does
not match the ATELIER’s settings, a “beep” will
sound.
TYPE B
STEREO
Commercial Audio CD (CDs other than those
designed for use with the player piano).
* Note that some commercial player piano CDs cannot be played back
on the ATELIER.
Adjusting the Timing of a Player Piano CD’s
Piano Sound and Accompaniment
(CD Audio Sync)
With some player piano CDs, the piano and accompaniment sounds
may not be synchronized properly.
In such instances, you can adjust the timing of the piano sounds so
that they are in time with the accompaniment.
Value 0–100