Roland ATELIER Combo AT-350C - Manual (Page 72)

72
Recalling the Order that the Registrations are Saved (Load Next)
You can recall Registrations in the order in which they were saved on the USB memory or User memory. This function is called “Load Next.”
When you will be performing live, you can save Registration sets to USB memory in the order in which you will be performing. Then while you perform,
you can recall the next Registration set easily and smoothly.
Changing the assignment of the [Manual] button
Here’s how you can assign the Load Next function to the [Manual] button.
1. Press the [Utility] button.
2. Press the Menu [
] [ ] buttons to select “ManualButtonAssign.”
3. Use the Value [-] [+] buttons to select “LOAD NEXT.”
4. Press the [Display/Exit] button.
To return to the basic screen.
Using the load next function to recall registrations
You can recall registrations in the order in which they are saved on a USB memory or in user memory.
1. If you want to load a Registration from USB memory, connect your USB memory to the USB Memory connector.
2. Press the [Manual] button.
The first Registration saved on the USB memory will be recalled into the ATELIER.
To cancel the procedure, press the [Reset] button.
3. Press the [Rec] button.
The Registration will be confirmed.
4. Press one of the Registration [1]–[8] buttons.
The Registration will be loaded (recalled into internal memory).
5. Repeat steps 2 and 4 to successively recall the Registration sets.
MEMO
You can assign the Load Next functions to either of the foot switches located on each side of the Expression Pedal (p. 93).