Roland ATELIER Combo AT-350C - Manual (Page 53)

53
Per
forming
Selecting the SuperNATURAL voice of the [Others] button
1. Press the Solo part [Others] button.
The display will show the voice name.
The indicator of the selected [Others] button will light.
2. While the display shows the voice name, use the Value [-] [+] buttons to select a SuperNATURAL voice.
The indicator of the Solo [Others] button will blink.
SuperNATURAL voices have an “N.” at the beginning of their name.
If you decide to cancel the procedure, press the [Display/Exit] button.
3. Press the Solo part [Others] button once again to confirm the voice you selected.
The indicator of the Solo part [Others] button will change from blinking to steadily lit, and the SuperNATURAL voice will be selected.
Optimal Settings for Playing a SuperNATURAL Voice
You can play SuperNATURAL voices even more effectively by making the appropriate solo mode and foot switch settings.
You can also automatically set these controllers for optimally playing a SuperNATURAL voice.
MEMO
If you want to use the foot switches, connect a pedalboard (PK series; sold separately) (p. 24).
1. Select a SuperNATURAL voice.
2. While the display shows the voice name, press the [Rec] button.
A confirmation message appears.
3. Press the [Rec] button.
The setting will be changed.
The following settings are changed.
Parameter Value set Explanation
Solo Mode (p. 92) POLYPHONIC The solo voice will sound on all keys played in the solo part.
L Foot Switch (p. 93) N.CONTROL1 Applies an effect to the SuperNATURAL voice (p. 54).