Roland ATELIER Combo AT-350C - Manual (Page 80)

80
Re-recording using performance data from a USB memory
If you want to re-record performance data from a USB memory, you must first load that performance data into the ATELIER’s internal memory.
4 5
2 3
1. Prepare the performance data.
Connect the USB memory to the USB Memory connector.
2. Press the [Song] button (confirm that its indicator is lit).
The Song Select screen appears.
3. Press the [Media] button to select “USB Memory.”
4. Press the Value [-] [+] buttons to select the performance data that you wish to load into internal memory.
5. Press the [Load] button.
The selected performance data will be loaded into internal memory.
6. Select the panel settings needed for recording the performance.
7. Record as described in “Re-recording” (p. 78).
If the following screen appears
If the performance data in the ATELIER has not been saved to a USB memory or Favorites (User Memory), the following message appears.
Press the [Rec] button if you’re sure you want to delete the performance data. If you decide that you don’t want to delete it, press the [Reset]
button.
MEMO
You can store performance data on a USB memory or in the Favorites (user memory) (p. 81).