Roland ATELIER Combo AT-350C - Manual (Page 40)

40
Adding Resonance to the Sound (Sustain Effect)
Sustain allows you to add a Sustain effect or decay to each voice after the keys are released.
The Sustain effect can be added simultaneously to the Upper (except the Solo Part), Lower, and Pedal voices.
* The Sustain effect will not be applied to the Solo part and vintage organ part voice.
1. Press the [Utility] button.
2. Press the Menu [
] [ ] buttons to select the “Sustain.”
3. Press the [Utility] button.
4. Press the Menu [
] [ ] buttons to select the desire part.
Part Upper, Lower, Pedal
5. Press the Value [-] [+] buttons to switch ON or OFF.
To return to the basic screen, press the [Display/Exit] button.
MEMO
By holding down the [Utility] button and using the Menu [ ] [ ] buttons, you can jump to editing screens for the octave shift (p. 37) and reverb
effect (p. 41) of the same part.
Changing the sustain length
The sustain length can be set independently for the each keyboard.
1. Press the [Utility] button.
2. Press the Menu [
] [ ] buttons to select the “Sustain.”
3. Press the [Utility] button.
4. Press the Menu [
] [ ] buttons to select “Length.”
5. Press the Menu [ ] [ ] buttons to select the part whose sustain length you wish to adjust.
Part Upper, Lower, Pedal
6. Press the Value [-] [+] buttons to adjust the setting.
Settings SHORT, MIDDLE, LONG
To return to the basic screen, press the [Display/Exit] button.