Roland ATELIER Combo AT-350C - Manual (Page 105)

105
Detailed S
ettings f
or
Various F
unc
tions
MIDI Settings
Selecting the MIDI Transmit Channel
(Tx MIDI Channel)
When you use the MIDI connectors of the ATELIER to transmit musical
data to external devices, for each keyboard (Upper, Lower, and Pedal)
you can specify the channel on which your playing will be transmitted
as MIDI messages. You can modify these Tx (Transmit) MIDI settings as
needed.
Parameter Channel
Solo, Upper, Lower,
Pedal, Drums, M.Perc,
Control
1–16
MEMO
• For details refer to “Connecting MIDI Devices” (p. 113).
• The Control part transmits expression pedal data and PC numbers.
MIDI IN Mode (MIDI IN Mode)
The ATELIER contains two sound generators: one for SMF data
playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control only
the sound generator for SMF data playback. However by changing
the MIDI IN Mode setting, you can also control the keyboard sound
generator from MIDI In.
Value Explanation
MODE 1 Control the instrument as a GS sound generator.
MODE 2
Channels 5 through 10 and Channels 12, 14,
15 are transmitted to the GS sound generator,
and all other channels are transmitted to the
keyboard sound generator.
How channels correspond to the MIDI IN mode
Channel MODE 1 MODE 2
1 GS Solo
2 GS Pedal/GS *
3 GS Lower
4 GS Upper
5–10 GS GS
11 GS Drums/SFX
12 GS GS
13 GS Manual Percussion
14, 15 GS GS
16 GS Control
* : When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound generator.
When the pedal part button is OFF, data received at the MIDI In
connector will control the GS sound generator.
* There are limitations on the types of MIDI messages that can be
received by the keyboard sound generator.
Specifying Transmission of PC Numbers
(Send PC Switch)
Transmission of PC (Program Change) numbers can be switched ON/
OFF.
Value Explanation
ON PC numbers are transmitted.
OFF PC numbers are not transmitted.
Setting PC Numbers (PC Number)
You can specify the Program Change number that will be transmitted
from MIDI Out when a Registration is selected.
Value Explanation
Bank MSB
(Bank Select MSB)
0–127
Bank LSB
(Bank Select LSB)
0–127
PC Num
(PC Number)
1–128