Roland ATELIER Combo AT-350C - Manual (Page 114)

114
Example connection: Playing a MIDI sound module from
the ATELIER
MIDI connectors
MIDI device
MIDI cable
MIDI IN
Making the connections
1. Turn the volume all the way down on the ATELIER and on the
device you’re about to connect.
2. Switch off the power to the ATELIER and the device you’re
about to connect.
3. Use a MIDI cable (sold separately) to connect the MIDI
connectors to each other.
4. Switch on the power to the ATELIER and the connected
device.
5. Adjust the volume level on the ATELIER and the connected
device.
6. You should also set the MIDI send channel as needed (p. 105).