Roland ATELIER Combo AT-350C - Manual (Page 108)

108
Restoring All the Factory Default
Settings (Factory Reset)
The settings stored in the ATELIER can be returned to their factory
settings. This function is called “Factory Reset.”
1. Turn down the volume to the minimum level, then turn off
the power.
2. While holding down the [One Touch Program] button, press
the [Power] switch to turn the power on.
* Do not turn off the power while the following screen is displayed.
When factory reset is completed, the basic screen reappears.
* Loading factory default settings will erase any Registrations
currently in the memory of the ATELIER. It is a good idea to save
important Registrations to USB memory. To save the registrations
you are currently using, refer to “Saving Registration Sets” (p. 68).
MEMO
• To reset all settings the User memory to their original factory
settings, refer to “Restoring All Settings Other Than the User
Memory to the Original Factory Settings (Panel Reset)” (p. 107).
• To return only the User memory settings to their original factory
conditions, refer to “Restoring the User Memory to the Original
Factory Settings (User Memory Reset)” (p. 107)).