Roland ATELIER Combo AT-350C - Manual (Page 57)

57
Per
forming
Using the Foot Switch
There are two foot switches located at either side of the expression pedal on the pedalboard (PK series; sold separately). These two foot switches are
assigned the following functions.
Right foot switch
Left foot switch
When the power to the ATELIER is turned on, the following functions are assigned to the left and right foot switches.
Foot switch Function
Right foot switch
Switch the Rotary effect between Fast/Slow
If Rotary is turned on, the Rotary effect will switch between “Fast” and “Slow” each time you press the Right foot
switch.
Left foot switch
Glide effect
While you are pressing the foot switch, the pitch will be temporarily lowered. When you release the Left foot
switch, the pitch will return to normal.
* The glide effect applies only to the upper keyboard part. It will not apply to the vintage organ of the upper keyboard part.
MEMO
• You can change the functions that are assigned to the left and right foot switches. For details, refer to “Changing the Foot Switch Functions (L Foot
Switch, R Foot Switch)” (p. 93).
• The functions assigned to the foot switches can be stored individually for each registration button (p. 66).
• A pedal switch (DP series; sold separately) connected to the Pedal (Control) jack will have the same function as the right foot switch.