Roland ATELIER Combo AT-350C - Manual (Page 109)

109
Connec
tions with O
ther E
quipmen
t
Connections with Other Equipment
Connecting a CD Drive and Playing
Songs
You can connect a commercially available CD drive, and use it to play
back music CDs or CD-ROMs on which SMF music files are saved.
USB Memory
connector
USB connector
USB cable
CD drive
1. Switch off the power to the ATELIER and the CD drive to be
connected.
2. Connect the USB cable included with the CD drive to the USB
Memory connector on the ATELIER.
3. Turn on the power to the ATELIER.
4. Turn on the power to the connected CD drive.
* The ATELIER does not support CD drives that are powered by the
USB bus. If you use a USB-bus-powered CD drive, you must use
the power supply included with the CD drive so that the drive will
operate under its own power.
Precautions concerning use of the CD
• You cannot play back CD-R/RW disks to which audio tracks have been
added or CDs containing both audio tracks and data (CD Extra).
• The ATELIER is capable of playing back only commercial CDs that
conform the official standards-those that carry the “COMPACT disc
DIGITAL AUDIO” logo.
• The usability and sound quality of audio discs that incorporate
copyright protection technology and other non-standard CDs cannot
be guaranteed.
• For more detailed information on audio discs featuring copyright
protection technology and other non-standard CDs, please consult the
disc vendor.
• You cannot save songs to CDs, and you cannot delete songs recorded
to CDs. Furthermore, you cannot format CDs.
Listening to Songs from Music CD
You can connect a CD drive to the ATELIER and use it to play music
CDs. This lets you perform or sing along with the backing of a music
CD.
* You can’t copy music CD songs to “Favorites”.
* It will take a certain amount of time until a music CD can be
selected.
1. Connect a commercially available CD drive to the USB
Memory connector, and insert the music CD into the CD
drive.
2. Press the [Song] button (confirm that its indicator is lit).
The Song select screen appears.
3. Press the [Media] button to select “CD.”
4. Press the Value [-] [+] buttons to select the song you want to
play.
5. Press the [Play/Stop] button to start playback.
6. To stop playback, press the [Play/Stop] button.
MEMO
You can press [Bwd] button or [Fwd] button to rewind or fast-
forward the playback.