Roland ATELIER Combo AT-350C - Manual (Page 84)

84
Erasing Performance Data
If you wish to discard your recording and re-record from the beginning, or if you wish to record a new performance, you must erase the previously-
recorded data.
2
1
3
1. Press the [Display/Exit] button a number of times to access the composer screen.
2. Press the [Load] and [Save] buttons simultaneously.
The following message, asking you to confirm your choice, will be displayed.
To cancel the procedure, press the [Reset] button.
3. If you are sure that you wish to erase the song, press the [Rec] button.