Roland ATELIER Combo AT-350C - Manual (Page 107)

107
Detailed S
ettings f
or
Various F
unc
tions
Restoring the User Memory to
the Original Factory Settings
(User Memory Reset)
You can restore the User memory to their original factory settings.
This function is called “User Memory Reset.”
1. Turn down the volume to the minimum level, then turn off
the power.
2. While holding down the Rhythm [Ballad/User] button, press
the [Power] switch to turn the power on.
Do not turn off the power while the following screen is displayed.
The user memory will be reset to the factory-set state.
MEMO
• To reset all settings other than the User memory to their original
factory settings, refer to “Restoring All Settings Other Than the User
Memory to the Original Factory Settings (Panel Reset)” (p. 107).
• If you want to reset all settings to their factory-set state, refer to
“Restoring All the Factory Default Settings (Factory Reset)” (p. 108).
Restoring All Settings Other Than the
User Memory to the Original Factory
Settings (Panel Reset)
All settings other than the User memory can be returned to their
factory settings. This function is called “Panel Reset.”
1. Turn down the volume to the minimum level, then turn off
the power.
2. While holding down the [Harmony Intelligence] button,
press the [Power] switch to turn the power on.
* Do not turn off the power while the following screen is displayed.
When panel reset is completed, the basic screen is appeared.