Roland ATELIER 5100001499 - Manual (Page 73)

71
Using the Performance Functions
Using the Performance Functions
You can use the Foot Switch as a dedicated switch for
selecting Registrations in order. The Registration will be
switched each time you press the foot switch.
The Registration Shift settings are stored to each
individual Registration Set.
When “RIGHT + Load Next” is assigned to the foot
switch and the Load Next function is used to switch
Registration Sets saved to a USB memory or floppy
disk, set the Registration Shift setting to “RIGHT +
Load Next” for all saved Registrations.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “Registration Shift.”
3. Press the Value [-] [+] buttons to change the
setting (OFF/RIGHT/LEFT/RIGHT + Load Next).
What is “Load Next”?
You can use the Load Next function to call up Registrations in
the order saved to the USB memory, User memory, or floppy
disk. When you will be performing live, you can save
Registration sets to USB memory, User memory, or floppy disk
in the order in which you will be performing. Then while you
perform, you can recall the next Registration set easily and
smoothly.
To return to the basic screen, press the [Utility] button.
This setting remains stored in memory even while the
power is turned off.
Using the Foot Switch to Switch
Registrations (Registration Shift)
Setting Description
OFF
You can use a function assigned to the foot
switch.
RIGHT
The right foot switch is dedicated to switching
Registrations.
The function assigned to the right foot switch
cannot be used.
LEFT
The left foot switch is dedicated to switching
Registrations.
The function assigned to the left foot switch
cannot be used.
NOTE
RIGHT +
Load Next
The right foot switch is dedicated to switching
Registrations. The function assigned to the
right foot switch cannot be used.
Selecting the Registration [4] button and
pressing the right foot switch activates the
Load Next function, calling up the next
Registration saved to the USB memory, User
memory, or floppy disk. The Registration Load
window appears in the display. When you
then press the right foot switch again, the
Registration Set is confirmed, and the
Registration [1] button is selected.
Example:
1
→ 2 → 3 → 4 → Load Next →
(Next Registration) 1
Setting Description
AT-75_e.book 71 ページ ２００８年８月２１日 木曜日 午前１０時９分