Roland ATELIER 5100001499 - Manual (Page 101)

99
Various Other Settings
Various Other Settings
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of volume.
This adjusts the amount of the Initial Touch effect applied.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “Initial Touch.”
fig.12-03
3. Press the Menu [ ] [ ] buttons to select
“Upper“ or “Lower.”
4. Press the Value [-] [+] buttons to edit the value.
To return to the basic screen, press the [Utility] button.
You can set the Bass Pedalboard to play simultaneous multiple
notes or single notes only.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “PedalBass Mode.”
fig.12-06
3. Press the Value [-] [+] buttons to switch the
Pedal Bass Mode “MONOPHONIC” or
“POLYPHONIC.”
To return to the basic screen, press the [Utility] button.
Adjusting How the Instrument
Responds
Adjusting the Initial Touch Sensitivity
(Initial Touch)
Keyboard
Upper, Lower
Setting Description
1–10
Initial Touch is ON.
Striking the keys more forcefully will produce
correspondingly louder sounds.
The change in volume when the keys are
played forcefully increases as the value is
increased.
OFF
Initial Touch is off.
Volume remains constant regardless of how
hard you play.
Changing the Pedalboard Polyphony
(Pedal Bass Mode)
Setting Description
MONOPHONIC Only single notes can be played.
POLYPHONIC Multiple notes can be played.
AT-75_e.book 99 ページ ２００８年８月２１日 木曜日 午前１０時９分