Roland ATELIER 5100001499 - Manual (Page 112)

110
Various Other Settings
You can specify the Program Change number that will be
transmitted from MIDI Out connector when a Registration is
selected.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “MIDI.”
3. Press the [Rec] button.
4. Press the Menu [ ] [ ] buttons a number
of times to select “PC Number.”
fig.12-26
5. Press the Menu [ ] [ ] buttons to select
“Bank MSB,” “Bank LSB,” “PC Num.”
6. Press the Value [-] [+] buttons to change the
setting.
To return to the basic screen, press the [Utility] button.
This instrument contains two sound generators: one for SMF
data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for SMF data playback. However by
changing the MIDI IN Mode setting, you can also control the
keyboard sound generator from MIDI In connector.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “MIDI.”
3. Press the [Rec] button.
4. Press the Menu [ ] [ ] buttons a number
of times to select “MIDI IN Mode.”
5. Press the Value [-] [+] buttons to change the
setting for MIDI IN Mode.
Setting PC Numbers (PC Number)
Menu Setting
Bank MSB (Bank Select MSB) 0–127
Bank LSB (Bank Select LSB) 0–127
PC Num (PC Number) 1–128
MIDI IN Mode
Setting Description
MODE 1
Control the instrument as a GS sound
generator.
MODE 2
Channels 5 through 10 and Channels 12, 14,
15 are transmitted to the GS sound generator,
and all other channels are transmitted to the
keyboard sound generator.
AT-75_e.book 110 ページ ２００８年８月２１日 木曜日 午前１０時９分