Roland ATELIER 5100001499 - Manual (Page 111)

109
Various Other Settings
Various Other Settings
The standard pitch of an instrument is generally considered as
the pitch of the middle A note. The “Master Tune” parameter
lets you adjust this standard pitch to match the pitch of any
other instruments that are playing together with the ATELIER.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “Master Tune.”
3. Press the Value [-] [+] buttons to adjust the
basic pitch.
To return to the basic screen, press the [Utility] button.
By pressing the Value [+] [-] buttons simultaneously, you can
restore the default setting (440.0 Hz).
This setting remains stored in memory even while power is
turned off.
Transmission of PC (Program Change) numbers can be
switched ON/OFF.
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “MIDI.”
3. Press the [Rec] button.
4. Press the Menu [ ] [ ] buttons a number
of times to select “Send PC Switch.”
fig.12-25
5. Press the Value [-] [+] buttons to switch the
Send PC Switch “ON” or “OFF.”
To return to the basic screen, press the [Utility] button.
This setting remains stored in memory even while power is
turned off.
Other Settings
Adjust the Standard Pitch (Master Tune)
Setting
415.3Hz–466.2Hz (0.1 Hz units)
Specifying Transmission of PC
Numbers (Send PC Switch)
Setting Description
ON PC numbers are transmitted.
OFF PC numbers are not transmitted.
AT-75_e.book 109 ページ ２００８年８月２１日 木曜日 午前１０時９分