Roland ATELIER 5100001499 - Manual (Page 28)

26
Selecting and Playing Sounds
The Solo section of the Upper keyboard is monophonic, that is, the Solo voice
will only sound for the highest note played on the Upper keyboard.
fig.02-11
Example:
Selecting “Tenor” for the Solo Voice Part
1.
Press the Solo [Sax] button (indicator lights).
The name of the selected voice appears in the display for a few seconds.
fig.02-12
Play the Upper keyboard. The selected voice will sound by the highest note
played.
Selecting Solo Voice
It is possible to change how a
Solo voice will sound.
Normally, the Solo voice will
be sounded by the highest note
you play on the Upper
keyboard, but you can make
settings so that the last-played
note will sound the Solo voice.
You can also make settings so
that the Solo voice will be
sounded by all notes of the
keyboard to which the Solo
voice is assigned. For details
refer to “Changing How the
Solo Voice Responds (Solo
Mode)” (p. 100).
AT-75_e.book 26 ページ ２００８年８月２１日 木曜日 午前１０時９分