Roland ATELIER 5100001499 - Manual (Page 108)

106
Various Other Settings
This setting determines the beat to be used when recording
performance songs.
1. Press the [Utility] button.
2. Using the Menu [ ] [ ] buttons a number
of times to select “Beat.”
fig.09-05
3. Press the Value [-] [+] buttons to set the beat.
To return to the basic screen, press the [Utility] button.
When recording your performance with playing Rhythm
performances or Automatic Accompaniment, the beat is set
automatically.
You cannot change the beat of previously recorded songs.
You can temporarily silence sound of a specific track. This is
referred to as “Track Mute.”
1. Press the [Utility] button.
2. Using the Menu [ ] [ ] buttons a number
of times to select “Track Mute.”
3. Press the Value [-] [+] buttons to select the
track that you wish to mute.
From the left, these are “R (Rhythm), A (Accompaniment),
B (Bass), L (Lower), U (Upper), S (Solo) and C (Control).”
What is a Track?
The ATELIER’s Composer features seven tracks. The
following types of performance are recorded to the
tracks.
4. Press the [Rec] button.
The character changes to “–”, indicating that the track is
muted.
5. Once again press the [Rec] button, and muting
will be canceled.
To return to the basic screen, press the [Utility] button.
Setting the Beat (Beat)
Setting
2/2, 0/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8,
9/8, 12/8
NOTE
NOTE
Silencing a Specific Track (Track Mute)
Track Description
R (Rhythm) Rhythm performances, Drums/SFX
A (Accomp)
Automatic Accompaniment (except
Bass)
B (Bass)
Pedal Bass voice, Bass part of the
Automatic Accompaniment
L (Lower) Lower voice
U (Upper) Upper voice
S (Solo) Solo voice
C (Control)
Panel operations, Expression Pedal
operations
AT-75_e.book 106 ページ ２００８年８月２１日 木曜日 午前１０時９分