Roland ATELIER 5100001499 - Manual (Page 109)

107
Various Other Settings
Various Other Settings
You can mute (silence) individual channels of performance
data of SMF music files (commercially available).
1. Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons a number
of times to select “Channel Mute.”
3. Press the Value [-] [+] buttons to select the
channel that you wish to mute.
From the left, these are “1 Ch. (channel 1), 2 Ch. ... 15
Ch., and 16 Ch.”
fig.09-09
4. Press the [Rec] button.
fig.09-10
The number will change to “–,” indicating that the
corresponding channel has been muted.
5. Once again press the [Rec] button, and muting
will be canceled.
To return to the basic screen, press the [Utility] button.
Channel mute will be defeated when you select different
performance data.
Assigning Commercial SMF Music Files to the
Tracks
Track Channel
R (Rhythm) 10
A (Accomp)
5, 6, 7, 8, 9, 11, 12, 13, 14, 15,
16
B (Bass) 2
L (Lower) 3
U (Upper) 4
S (Solo) 1
During recording, the control track will store the
operations as follows.
Panel Operations (Voice selections, Tempo
changes, Rotary fast/slow etc.)
Newly recorded performance data will be added
without erasing the previously recorded data.
If you wish to record new performance data, erase all
the recorded data (p. 87).
Expression Pedal Operations
The way in which expression operations are recorded
will depend on the setting of the “Exp. Source” item
“Recording” in the Utility menu.
For details refer to “Changing the Function of the
Expression Pedal (Exp. Source)” (p. 100).
PEDAL
Expression pedal operations will be
recorded.
If expression data has already been
recorded, the previously recorded
data will be erased as the new data
is recorded.
COMPOSER
Expression pedal operations will
not be recorded.
If expression data has already been
recorded, the previously recorded
data will remain without being
erased.
Muting Individual Channels of
Performance Data (Channel Mute)
AT-75_e.book 107 ページ ２００８年８月２１日 木曜日 午前１０時９分