Roland ATELIER 5100001499 - Manual (Page 37)

35
Selecting and Playing Sounds
Selecting and Playing Sounds
The pitch of the sound played by the keyboard can be adjusted in one-octave
steps. This function is called “Octave Shift.”
You can apply an Octave shift to the following 4 Parts:
• The Upper Part
• The Lower Part
• The Pedal bass Part
• The Solo Part
1.
Press the [Utility] button.
2.
Press the Menu [ ] [ ] buttons a number of times to
select “Octave Shift.”
f
3.
Press the [Rec] button.
4.
Use the Menu [ ] [ ] buttons to select a Part to which
you wish to apply an Octave Shift.
fig.02-16
5.
Use the Value [-] [+] buttons to set the amount of shift.
The value can be set to a range of +/- 3 octaves.
To return to the basic screen, press the [Utility] button.
Transpose the Pitch in Octave Units (Octave Shift)
Part
Pedal, Lower, Upper, Solo
NOTE
Please note that when you
apply the Octave Shift function
to certain voices, their pitch
could be stretched beyond their
recommended note ranges, and
they may not sound as
expected. Care should be taken
when using Octave Shift.
AT-75_e.book 35 ページ ２００８年８月２１日 木曜日 午前１０時９分