beautypg.com

Loading a set of registrations, P. 63, p. 87, p. 92) – Roland ATELIER 5100001499 User Manual

Page 65

background image

63

Using the Registration Buttons

Using the Registration Buttons

Here’s how to recall a previously saved Registration set from the User memory
or USB memory into the memory of the ATELIER. Registrations can be selected
in the following two ways.

Loading a Set of Registrations

You can load a “set” (a collection of settings for Registration buttons [1]–[4])
from Floppy disk, USB memory or User memory.

Loading an Individual Registration

Recall the settings of one of the Registration [1]–[4] buttons.

1.

If you want to load a Registration from USB memory,
connect your USB memory to the External Memory
connector.

2.

Press the [Registration] button to make the indicator light.

The Registration Select screen appears.

3.

Press the [Media] button to select the desired media.

If you want to load from the Registration of USB memory, select “Ext Memory.”
If you want to load from the Registration of floppy disk, select “Disk.”
If you want to load from the Registration of User memory, select “User.”

4.

Press the Value [-] [+] buttons to select the Registration that
you wish to load into internal memory.

To cancel the procedure, press the [Registration] button.

5.

Press the [Load] button to execute loading.

When loading is complete, the Registration Select screen reappears.

Loading Previously Saved Registration Sets Into the ATELIER

Loading a Set of Registrations

NOTE

Be aware that when you load
Registrations from a USB
memory or User memory, the
Registrations that were
previously in internal memory
will be lost. It is a good idea to
save important Registrations to
USB memory or User memory
(p. 61).

If you want to load a
Registration from a floppy disk,
connect the floppy disk drive to
the External Memory connector,
and insert the floppy disk
containing the Registration into
the floppy disk drive.

Since the ATELIER is designed
with compatibility in mind,
Registrations created on other
instruments in the ATELIER
series can be recalled.
However, due to differences in
the built-in sounds and
functions, there will be cases in
which the settings cannot be
exactly replicated.

AT-75_e.book 63 ページ 2008年8月21日 木曜日 午前10時9分

This manual is related to the following products: