Roland ATELIER 5100001499 - Manual (Page 116)

114
Various Other Settings
You can restore the User memory to their original factory
settings.
This function is called “User Memory Reset.”
1. Turn down the volume to the minimum level,
then turn off the power.
2. While holding down the Rhythm [Ballad/User]
button, press the [Power On] switch to turn the
power on.
fig.01-15
Do not turn off the power while the following screen is
displayed.
fig.01-16
The User memory will be reset to the factory-set state.
To reset all settings other than the User memory to their
original factory settings, refer to ”Panel Reset” (p. 114). If
you want to reset all settings to their factory-set state, refer to
“Factory Reset“ (p. 18).
When User memory reset is completed, the basic screen
is appeared.
All settings other than the User memory can be returned to
their factory settings. This function is called “Panel Reset.”
1. Turn down the volume to the minimum level,
then turn off the power.
2. While holding down the [Harmony
Intelligence] button, press the [Power On]
switch to turn the power on.
fig.01-15
Do not turn off the power while the following screen is
displayed.
fig.01-16
When panel reset is completed, the basic screen is
appeared.
Restoring the User Memory to
the Original Factory Settings
(User Memory Reset)
What is User Memory?
“User Memory” refers to an area inside the instrument
where you can store the Registration you create and the
performances you record. Registration and SMF music files
saved on USB memory can also be copied to User memory.
User memory is quite useful, since anything you place
there will be retained even while the power is turned off.
The following things are stored in User memory:
• Songs you’ve registered in “Favorites”
• Rhythms
• Registration sets
NOTE
Restoring All Settings Other
Than the User Memory to the
Original Factory Settings
(Panel Reset)
NOTE
AT-75_e.book 114 ページ ２００８年８月２１日 木曜日 午前１０時９分