Roland KF-90 - Manual (Page 83)

83
Chapter 3
Chapter 3 Some Handy Features
Playing Back Songs for Practice
Let's try practicing along with commercial music files or songs recorded on
floppy disk.
You can move to a certain measure within a song, and play back the song
from that location.
fig.03-08
1.
Insert the floppy disk into the disk drive (p. 39).
2.
Press the [Song/Disk] button.
A Song/Disk screen appears.
fig.03-09-2.e_60
3.
Touch the screen to choose a song.
You can also use the Value [-] [+] buttons or the dial to choose a song.
4.
Touch several times.
Display the screen where the measure number appears in the top-right area
of the screen.
5.
Press the Play [ ] button to play back the song.
6.
Press the Bwd [ ] and Fwd [ ] buttons to move to a bar
where you want to listen.
Pressing the button once moves your position by one measure. Hold down
the button to move forward or backward continuously.
7.
To stop playback of the song, press the Stop [ ] button.
If there is song data in the
KF-90’s internal memory,
the “Delete song” message
appears. For more
information, see “If the
following message
appears” (p. 99).
NOTE
When you start playback of
Music Files, the measure
number on the Basic screen
appears in reverse video.
While this is in reverse
video, the KF-90 is reading
data from the floppy disk,
so wait a few moments
until it finishes.