Roland KF-90 - Manual (Page 193)

SHORT knobbed bolts
for the stand (2)
Screws for
the music stand (2)
Two of the four
knobbed bolts
are not needed
with the KF-90
LONG knobbed bolts
for the stand (2)
Use at the REAR to
fasten the piano
(two places)
Use at the FRONT
to fasten the piano
(two places)
Four bolts supplied with
FPS-9
Four screws/bolts supplied with
KF-90
Important Notes on Combining the KF-90 and FPS-9
* If the long knobbed bolts are mistakenly used for the holes at the front, it will
be impossible to tighten the bolts properly. Be sure to use the appropriate bolts.
* If you are combining the Roland
FP-9
digital piano
with the
FPS-9
stand, use all four of the long knobbed
bolts supplied with the
FPS-9
stand.
The KF-90 piano
The FPS-9 stand
KF-90
FPS-9
To fasten the
KF-90
piano to the
FPS-9
stand, refer to the illustration below.