Roland KF-90 - Manual (Page 117)

117
Chapter 5 Advanced Recording Function
Chapter 5
■ Re-Recording Part of Your
Performance
(Punch-in Recording)
You can re-record only a specified passage as you listen to a
recorded performance.
This recording method is called “Punch-in Recording.”
This function lets you record over only at a specified point in
a part, as you listen to a prerecorded performance in another
section. This is a very convenient feature to have in situations
such as when you want to record over only one part of the
melody.
Punch-In Recording offers the following two methods.
• Recording the passage specified by markers A and B
(Auto Punch In/Out)
Before you start recording, place markers A and B to define
the passage you want to record over. Make the setting for
punch-in recording, and carry out recording. You can re-
record just the passage between markers A and B.
• Beginning recording at the point where the pedal is
pressed (Manual Punch In/Out)
You can play back a recorded performance and depress the
pedal at the desired place to start recording. Depressing the
pedal a second time cancels recording and returns you to
playback.
Recording a Passage specified by
markers
1. Before you start recording, place markers A and B
to define the passage you want to record over.
Following the procedures described in “Placing/Erasing
a Marker Within a Song” (p. 90), use Markers A and B to
specify the interval.
2. At the Rec Mode screen, choose
Out>.
fig.05-02.e_50
This changes the recording mode to “Punch-In
Recording.”
Touch to go back to the previous screen.
3. Start recording.
Start recording as described in “Redoing a Recording”
(p. 101).
Up until the specified interval, the performance as
already recorded is played back.
When you reach the specified interval, sounds are erased
as recording starts; begin playing now.
When the end of the specified interval is passed,
recording stops, and the KF-90 returns to playback of the
performance already recorded.
4. Press the Stop [ ] button to stop playback.
Starting Recording from the Measure
Specified by Pedals
When you’re using pedals, change the action of the pedal
ahead of time.
Follow the steps in “Assigning Functions to Pedals” (p. 147)
and assign to the pedal.
1. At the Rec Mode screen (p. 115), choose
Punch In/Out>.
This changes the recording mode to “Punch-In
Recording.”
Touch to go back to the previous screen.
2. Begin recording.
Start recording as described in “Redoing a Recording”
(p. 101).
The performance that you recorded will be played back.
Depress the pedal, and recording will start.
Depressing the pedal again stops recording, and the KF-
90 returns to playback of the performance already
recorded.
3. Press the Stop [ ] button, and playback of the
song is stopped.
* When you’re finished with Punch In Recording, return to the
ordinary Replace Recording mode. Take a look at “Selecting
the Recording Method” (p. 115).