Roland KF-90 - Manual (Page 18)

18
Before You Play
Connecting a Microphone
You can connect a microphone into the Mic In jack, and enjoy
karaoke with the KF-90.
fig.00-09
1. Connect a microphone to the Mic In jack on the
back of the instrument.
2. Rotate the [Mic Volume] knob next to the Mic In
jack to adjust the volume level for the
microphone.
→ You can use a microphone (sold separately). When purchasing
a microphone, please consult the vendor where you bought the
KF-90.
Some Notes on Using a Microphone
• Be careful of high volume levels when using mikes late
at night or early in the morning.
• When connecting a microphone to the KF-90, be sure to
lower the volume. If the volume control is too high when
the microphone is plugged in, noise may be produced by
the speakers.
• Howling could be produced depending on the location
of microphones relative to speakers. This can be
remedied by:
• Changing the orientation of the microphone.
• Relocating microphone at a greater distance from
speakers.
• Lowering volume levels.
About the Touch Screen
The KF-90 makes use of a Touch Screen. This lets you carry
out a wide variety of actions just by touching the screen.
fig.00-10.j
Immediately after the power is turned on, this screen
appears. For more detailed information, refer to p. 50.
* The Touch Screen is operated by touching it with your finger.
Pressing hard, or using a hard object can damage the Touch
Screen. Be careful not to press too hard, and be sure to use only
your fingers to operate the Touch Screen.
* The positioning of the Touch Screen may become displaced due
to changes in the surrounding environment and over time. If
this happens, follow the steps in “Repositioning the Touch
Screen” (p. 155) to correct the pointer position.
* Do not place items on the touch panel.