Roland KF-90 - Manual (Page 139)

139
Chapter 7 Using Other Functions
Chapter 7
4. After you’ve entered a name, touch to
choose a destination for saving the button
settings.
Touch to go back to the previous screen.
5. Touch on the screen.
The present panel settings (User Program) are stored on
the KF-90’s [User Program] button.
* Never try to switch off the power while this operation is in
progress. Doing so may damage the internal memory, making
it impossible to use this instrument.
→ You can return the settings stored on the [User Program]
button to the product’s factory defaults. Check out “Restoring
the Factory Settings (Factory Reset)” (p. 154).
Calling Up User Program
1. Press the [User Program] button.
2. Touch the name of the User Program you want to
call up.
If the User Program you want to call up is not displayed,
touch Page < > and < > to switch screens.
Touching the User Program name changes the panel
settings to the stored values.
■ Changing How Button Settings
Are Called Up
If you wish, for times when you call up a User Program, you
can set it so settings related to automatic accompaniment
aren’t changed unless you continue touching the Touch
Screen for a certain period of time.
1. Press the [User Program] button.
2. Touch .
A screen like the one shown below appear.
fig.07-16.e
3. Touch or .
Display Description
Instant The settings related to automatic
accompaniment are also switched right away
when you touch the screen.
Delayed To change the settings related to automatic
accompaniment, touch and continue pressing
the screen for a short while.
Touch to go back to the previous screen.