Roland KF-90 - Manual (Page 155)

155
Chapter 8 Changing Various Settings
Chapter 8
Repositioning the Touch Screen
If you’ve been using the Touch Screen for some time, the
pointer may be shifted, making the KF-90 react incorrectly.
You should correct this displacement when necessary by
performing calibration (repositioning).
1. Press the [Function] button.
2. Touch .
3. Touch .
If is not displayed, touch Page < >
and < > to switch screens.
fig.08-30.eps
Touch to go back to the Function screen.
4. Touch on the screen.
5. Touch the points indicated on the touch screen.
* Do this carefully, because touching a location that’s different
from the one indicated for the pointer may make the
displacement even worse. Be sure to touch the pointer
accurately.
6. Touch at the bottom of screen to
store the setting of calibration to KF-90.
* If you turn the power off before doing step 6, the setting of
calibration will go away.