Roland KF-90 - Manual (Page 160)

160
Chapter 9 Connecting External Devices
Connecting to Audio
Equipment
When you connect the KF-90 to audio equipment, you can
play the sounds from the KF-90 through the speakers on the
audio equipment or record your performances on a tape
recorder or other recording device.
When connecting, please use an audio cable with a standard
phone plug (sold separately).
■ Connectors
fig.09-
Output Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the KF-90 through the
speakers on the connected equipment or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
Input Jacks
You can connect another sound source, such as audio
equipment or an electronic instrument using audio cables
(sold separately) and play the sounds from the connected
device through the speakers on the KF-90.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
■ Making the Connections
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing Sounds from the KF-90 Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
fig.09-
1. Turn the volume all the way down on the KF-90
and on the device you’re about to connect.
2. Turn off the power to the KF-90 and other
connected equipment.
3. Use audio cables (sold separately) to make the
connection.
4. Switch on the KF-90.
5. Switch on the connected device.
6. Adjust the volume level on the KF-90 and the
connected device.
Recording KF-90 Performances on a Recording Device
7. Start recording with the connected device.
8. Play the keyboard.
9. When the performance ends, stop recording on
the connected equipment.
Playing Audio Equipment Sounds
Through the Speakers on the KF-90
fig.09-
1. Turn the volume all the way down on the KF-90
and on the device you’re about to connect.
2. Turn off the power to the KF-90 and other
connected equipment.
3. Use audio cables (sold separately) to make the
connection.
4. Turn on the connected equipment.
5. Turn on the KF-90.
6. Adjust the volume level on the KF-90 and the
connected device.
After use, turn off the power using the following procedure.
1. Turn the volume all the way down on the KF-90
and on the device you’re about to connect.
2. Turn off the connected equipment.
3. Turn off the KF-90.
Input L/R
(Line In, AUX IN)
Output L/R
(Line In, AUX IN)