Roland SC-88 Pro - Manual (Page 16)

■ Tuning to other instruments (Tuning)
❍ M. Tune (Master Tune) 415.3 — 466.2 Hz
When you are playing in an ensemble with other instruments or need to set this unit
to match the pitch of another instrument, adjust the Master Tune setting. The displayed
value (e.g., 440.0 Hz) indicates the frequency of the A4 note's pitch (note number 69).
Tuning procedure
1.
Press [ALL] to make the button indicator light.
2.
Simultaneously press both the PART [ l l l l ] [ r r r r ] buttons.
3.
Press [ u u u u ] or [ d d d d ] to select “
M.Tune
”
4.
As you listen to the sound, use INSTRUMENT [ l l l l ] [ r r r r ] to adjust the pitch
of this unit to match the pitch of the other instrument.
Pressing [ l ] will lower the pitch, and pressing [ r ] will raise the pitch. The display will
show the frequency of the pitch, so if you are tuning to a specific frequency you can
visually check the desired value.
5.
When you have made the desired setting, simultaneously press both the
PART [ l l l l ] [ r r r r ] buttons.
* It is also possible to set the tuning independently for each Part (p.28).
PART INSTRUMENT
ALL
100
0
LEVEL PAN
>M. Tune: 440.0
INSTRUMENT PART
LEVEL PAN
REVERB CHORUS
KEY SHIFT MIDI CH
DELAY
ALL
MUTE
SC-55
MAP
SC-88
MAP
1 2
3
4 5
Chapter 1. Try out the unit 14