Warnings, Nifconf_warn_object_not_wired, Nifconf_warn_no_trend_selected – National Instruments NI-FBUS User Manual
Page 109: Nifconf_warn_trend_not_wired, Nifconf_warn_project_errors
Appendix A
Error Messages and Warnings
NI-FBUS Configurator User Manual
A-10
ni.com
Warnings
If you receive a warning while using the NI-FBUS Configurator, refer to
this section for a description of the warning and possible solutions.
NIFCONF_WARN_MEMORY_LOW
The system is low on memory.
NIFCONF_WARN_OBJECT_NOT_WIRED
This object is not connected by wires to any other object.
NIFCONF_WARN_NO_TREND_SELECTED
A trend is wired, but no trend is checked.
NIFCONF_WARN_TREND_NOT_WIRED
A trend is selected, but not wired to a device.
NIFCONF_WARN_PROJECT_ERRORS
There are errors that might cause problems in the download of the
configuration. Look at the Errors tab in the status window.