National Instruments NI-FBUS - Manual (Page 107)

Appendix A Error Messages and Warnings
NI-FBUS Configurator User Manual A-8 ni.com
NIFCONF_ERR_STANDARD_DD_MISSING
The NI-FBUS Configurator could not find the standard device
description file.
NIFCONF_ERR_STRING_NOT_FOUND
There is a missing resource string.
NIFCONF_ERR_TEMPLATE_NOT_ASSIGNED
The template is not assigned to a valid project object.
NIFCONF_ERR_TOO_MANY_FB_SCHEDULE_ENTRIES
The schedule for this object contains too many entries for the function
block schedule of the device. Normally, bad choices for macrocycle times
cause this error. Use macrocycle times that are integer multiples of each
other to correct this problem.
NIFCONF_ERR_TOO_MANY_LAS_SCHEDULE_ENTRIES
The number of LAS schedule entries exceeds the number of available
entries in the LAS device. Choose integer multiple macrocycle values and
reduce the number of data links that go between devices to correct this
problem.
NIFCONF_ERR_TYPE_INFO_UNAVAILABLE
The NI-FBUS Configurator cannot read the type information for the object.
NIFCONF_ERR_UNSCHEDULED_TRAFFIC_CONFLICT
The publish time is conflicting with the reserved 128 octet time at the end
of a macrocycle. This time is used for unscheduled traffic.
NIFCONF_ERR_WRONG_TYPE
This object has the wrong type.
NIFCONF_ERR_SAVE_OLDVERSION
This project is an old version, and could not be saved. In order to avoid this
error, you should convert the project to the latest version when you open the
project.