National Instruments NI-FBUS - Manual (Page 103)

Appendix A Error Messages and Warnings
NI-FBUS Configurator User Manual A-4 ni.com
NIFCONF_ERR_BAD_WIRE
This wire is not completely attached to an output and input(s).
NIFCONF_ERR_BLOCK_SCHEDULE_CONFLICT
A block in this device is already scheduled for this time. Do not schedule
more than one block in the device at the same time.
NIFCONF_ERR_BUF_TOO_SMALL
The buffer is too small.
NIFCONF_ERR_CONFIGURING
You are configuring this project. If you get this error, stop configuring the
project to continue.
NIFCONF_ERR_CONFUSED_WIRE
This wire is not working. The NI-FBUS Configurator has removed it.
NIFCONF_ERR_CORRUPT_FILE
The NI-FBUS Configurator found a corrupt file object.
NIFCONF_ERR_COULD_NOT_DETERMINE_SCHEDULE
The NI-FBUS Configurator cannot fit the schedule of the loop into the
current schedule. Usually, insufficient time or poor choice of loop times
cause this error. Use integer multiples such as 1, 2, 4, and so on, instead of
multiples like 5, 7, 13, and so on, to solve this problem.
NIFCONF_ERR_COULD_NOT_START_THREAD
The NI-FBUS Configurator is unable to start a new thread.
NIFCONF_ERR_DD_SIZE_MISMATCH
The actual data size does not match the device description data size.
NIFCONF_ERR_DEVICE_NOT_ALIVE
The device is not responding.