National Instruments NI-FBUS - Manual (Page 102)

Appendix A Error Messages and Warnings
© National Instruments Corporation A-3 NI-FBUS Configurator User Manual
NIF_ERR_RESOURCES
NI-FBUS is unable to allocate some system resource. This is usually a
memory problem.
NIF_ERR_SERVER_CONNECTION_LOST
The session established with NI-FBUS for this descriptor has been closed
or lost.
NIF_ERR_SERVER_NOT_RESPONDING
Either the NI-FBUS server has not been started, or the server, in its current
state, cannot respond to the request.
NIF_ERR_SM_NOT_OPERATIONAL
The device is present, but cannot respond because it is at a default address.
NIF_ERR_SYMBOL_FILE_NOT_FOUND
NI-FBUS could not find the symbol file.
NIF_ERR_TIMEOUT
The device containing the object is present but did not respond within the
timeout period.
NIF_ERR_WRITE_IS_PROHIBITED
The device reported that the WRITE_LOCK parameter value is set.
The WRITE_LOCK parameter prohibits writing to the name parameter.
NIF_ERR_WRONG_MODE_FOR_REQUEST
The device reported that the current function block mode does not allow
you to write to the parameter.
NIFCONF_ERR_ADDRESS_OUT_OF_RANGE
This address does not fit in the allowable range of addresses.
NIFCONF_ERR_ADDRESS_USED
This address is already taken.