Syslog capture configuration – Nortel Networks NN43001-504 User Manual
Page 215
Data capture
215
•
the TLAN and ELAN IPs for the Voice Gateway Media Cards (VGMC)
•
a network diagram
For more information, see
•
a site survey
•
screenshots of the DHCP server scope with the fields fully expanded
(no truncation of data in the view)
•
the encryption protocol
•
the software version of the WLAN IP Telephony Manager 2245
•
the firmware version of the test handset
•
the release (RLS) of the PBX software
•
the version of the code that currently runs on the Signaling Servers
•
the software version on the VGMCs
•
the make, model and software version of the AP, the Controller or the
WLAN Manager
Network diagram
For each element in the network, include the following information as it
applies to each element:
•
manufacturer
•
model identification
•
software version
•
firmware version
•
loadware version
•
IP addresses
•
MAC addresses
•
port assignments
•
VLANs
•
other connectivity information
Syslog capture configuration
Configure DHCP Option 7 with the IP of the Syslog Server or, if you are not
using DHCP, configure this manually as a static entry in the handset
Configure the IP of the Syslog Server in the WLAN IP Telephony Manager
2245: Network configuration > Syslog Server.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504
01.02
Standard
Release 5.0
15 June 2007
Copyright © 2004-2007, Nortel Networks
.