Nortel Networks NN43001-504 - Manual (Page 148)

148 Appendix A WLAN Application Gateway 2246
Model number
Maximum
number of users
NTTQ65CA 256
NTTQ65DA 512
NTTQ65EA 1024
NTTQ65FA 10000
In Figure 23 "WLAN Application Gateway 2246 connections" (page 148) ,
a WLAN Application Gateway 2246 is connected to the site LAN through
an Ethernet switch. The connection to the Application Server can be
accomplished by a direct connection (RS-232) or through the Ethernet
connection. Only one of these connections can be used at one time.
The IP address of the WLAN Application Gateway 2246 must be configured
during initial configuration. After the IP address is established, the WLAN
Application Gateway 2246 can be accessed by the Application Server
through the RS-232 port or through the LAN using Telnet.
Figure 23
WLAN Application Gateway 2246 connections
System overview
At a typical site, the WLAN Application Gateway 2246 is connected to the
Ethernet switch through an RJ-45CAT 5 cable. The Application Server is
connected through the RS-232 port. The client’s system can include a
LAN and its Application Server with a TAP connection to a communications
device such as a paging controller.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.