Nortel Networks NN43001-504 - Manual (Page 155)

Configuration 155
4 Select the Feature Programming option to configure the function
sequence that activates the application. See
"Programming a
feature" (page 163) .
—End—
Configuring the OAI Box
Follow the steps in Procedure 15 "Configure the system type from the OAI
Box Configuration option" (page 155) to configure the system type.
Procedure 15
Configure the system type from the OAI Box Configuration option
Step Action
1 From the NetLink OAI System screen, select OAI Box
Configuration.
Note: This option does not appear unless Use NetLink GW with
mogX00 is configured to Yes, which is the default.
2 Enter the configuration information for the WLAN Application
Gateway 2246 (provided by the network administrator).
• Use NetLink GW with mogX00—change this option to No.
• TFTP Download Master—enter the IP address of the TFTP
Server.
• Maintenance Lock—the system sets this option to Yes after
maintenance activities are performed that require a reset. This
option cannot be changed. It is automatically set. Reset the
system at exit to clear Maintenance Lock. Maintenance Lock
prevents any new calls from starting.
• Reset System—if this option is set to Yes, the WLAN Application
Gateway 2246 is reset after pressing ENTER.
• Reset All Systems—not applicable.
3 Press Esc on the keyboard to return to the NetLink OAI System
screen.
—End—
Configuring network parameters
Follow the steps in Procedure 16 "Configuring the network" (page 156) to
configure network parameters, including IP address.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.