Nortel Networks NN43001-504 - Manual (Page 206)

206 Appendix B Troubleshooting WLAN IP Telephony installations
mnem is a mnemonic that indicates why the handset did not hand off to
this candidate:
Unkn reason unknown
Weak signal strength too weak
Rate One or more basic rates not supported
Full AP cannot handle bandwidth requirements
AthT Authentication Timeout
AthF Authentication Failure
AscT Association Timeout
AscF Association Failure
SecT Security Timeout
SecF Security Failure
Cnfg Configuration error—AP is not configured correctly (check
security, QoS mode, or network infrastructure)
Diagnostics Screen 4 displays the following information:
AssocCount nnnnn
ReAssocCount nnnnn
AsssocFailure nnnnn
ReAssocFail nnnnn
where
AssocCount is the association count since power up.
ReAssocCount is the reassociation count since power up.
AssocFailure is the number of association failures since power up.
ReAssocFail is the number of reassociation failures since power up.
Diagnostics Screen 5 displays the following information:
Sec-ErrCount nnnnn
LstSecErrSeq nnnnn
where
Sec-ErrCount is the security error count since power up.
LstSecErrSeq is the MAC frame sequence number with the last
security error.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.