beautypg.com

Save the configuration, Procedure 7 saving the configuration, Procedure 7 – Nortel Networks NN43001-504 User Manual

Page 105: Saving the configuration

background image

Configure the network

105

Maintenance Lock—indicates whether the WLAN IP Telephony
Manager 2245 is in Maintenance Lock mode.

Disable Telnet Service—indicates whether a Telnet session can access
the WLAN IP Telephony Manager 2245. The available options are:

Y—prevents a Telnet session from accessing the WLAN IP

Telephony Manager 2245.

N—allows a Telnet session to access the WLAN IP Telephony

Manager 2245.

Send/All—in a system with multiple WLAN IP Telephony Managers
2245, the SendAll option is provided to speed configuration and
ensure identical settings. The S=SendAll option enables configuration
parameters of the selected field to be sent to every WLAN IP Telephony
Manager 2245 on the LAN. SendAll can only be used after the IP
address is configured on each WLAN IP Telephony Manager 2245
using a serial connection. If identical configuration parameters are to be
used for all WLAN IP Telephony Managers 2245, configure only the IP
address and custom hostname (if desired) on each WLAN IP Telephony
Manager 2245 using the initial serial connection. Then connect through
the LAN to this WLAN IP Telephony Manager 2245 and use SendAll to
transmit identical configuration options of each field for all WLAN IP
Telephony Managers 2245.

ATTENTION

IMPORTANT!

If Send/All is used on the system, all passwords must be identical. Do not change
the password at the initial configuration if the SendAll option is used. Use the
default password and change it globally, if desired, after a LAN connection is
established for all WLAN IP Telephony 2245 units.

If independent administration of each WLAN IP Telephony Manager 2245 is
desired, the passwords can be set during initial configuration.

Save the configuration

Reset the WLAN IP Telephony Manager 2245 in order to save the
configuration parameters. Follow the steps in

Procedure 7 "Saving the

configuration" (page 105)

to save the configuration.

Procedure 7

Saving the configuration

Step

Action

1

Press Esc on the keyboard.

If the WLAN IP Telephony Manager 2245 is in Maintenance Lock, a
prompt appears asking if the configuration is to be saved.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504

01.02

Standard

Release 5.0

15 June 2007

Copyright © 2004-2007, Nortel Networks

.