Nortel Networks NN43001-504 - Manual (Page 106)

106 WLAN IP Telephony Manager 2245 configuration
2 Enter Y.
3 Alternatively, select the Reset option found in the SVP-II
Configuration screen. Press Esc. See
"Configure the WLAN IP
Telephony Manager 2245" (page 106) .
—End—
Changing the master IP address
To change the IP address of the master WLAN IP Telephony Manager 2245,
change it in the Network Configuration menu and reboot the system.
The alias IP addresses can now be changed in each of the other WLAN IP
Telephony Managers 2245 without incurring an error.
Configure the WLAN IP Telephony Manager 2245
The WLAN IP Telephony Manager 2245 is configured on the SVP-II
Configuration screen where the mode of the WLAN IP Telephony Manager
2245 is configured. This screen is also used to lock the WLAN IP Telephony
Manager 2245 for maintenance and reset the WLAN IP Telephony Manager
2245 after maintenance.
The WLAN IP Telephony Manager 2245 automatically locks for maintenance
if the IP address is changed. When a Maintenance Lock occurs, the WLAN
IP Telephony Manager 2245 must be reset upon exit. All active calls are
terminated during a reset.
Access the SVP-II Configuration screen from the NetLink SVP-II System
menu. Scroll to SVP-II Configuration and press Enter.
Perform the desired SVP-II configuration.
• Phones per Access Point—enter the number of simultaneous calls
supported for the AP type. AP specifications are described in
Appendix
"Compatible Access Points" (page 223) .
• 802.11 Rate—select Automatic to allow the wireless handset to
determine its rate (up to 11Mbs). Select 1MB/2MB to limit the
transmission rate between the wireless handsets and APs.
• SVP-II Master—the IP address of the master of the WLAN IP Telephony
Manager 2245 group must be identified. Select one of the following
identification options:
— Enter the IP address of the master of the WLAN IP Telephony
Manager 2245 in each WLAN IP Telephony Manager 2245 group.
Include the periods used in the IP address.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.