Tps cli commands – Nortel Networks NN43001-504 User Manual

Page 141

Dropped calls

141

192.168.10.200 is an alias IP address assigned by the WLAN IP Telephony
Manager 2245.

TN HWID STATUS HOSTIP TERMIP PORT

______ _______________________________ ______

__________ ____________ _______

0x600a 00000000000003000907a017e476607 REG

47.11.214.165 192.168.10.200 0x1450

CAPS

_________

0x00000000

--------------------------------

codec bdwth(k) codecCaps desc
--------------------------------

4 190 0x00000000 1

3 190 0x00000000 1

17 47 0x00000001 1

value = 537232412 = 0x2005841C

Note: For information about more CLI commands, see

"Zones" (page

77)

TPS CLI commands

The following sections describe TPS command line interface (CLI)
commands.

dsetShow command

In the

dsetShow

command output, the handsets have a specific Hardware

ID. The alias IP address is output, not the physical wireless handset IP
address.

In the following example, the IP Phone 2004 has an IP address of
192.168.10.100 and the WLAN Handset 2211 has an alias IP address of
192.168.10.200. The syntax of the Hardware ID is as follows:

•

first two digits—Manufacturer Location. Manufacturer Location is 18 for
the IP Phone 2004 and 30 for the WLAN Handset 2211.

•

next six digits—Manufacturer Code. The Manufacturer Codes are
defined as follows:

— IP Phone 2004 Phase 1—006038

— IP Phone 2004 Phase 2—000ae4

— WLAN Handset 2210—00907a

— WLAN Handset 2211—00907a

— WLAN Handset 2212—00907a

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504

01.02

Standard

Release 5.0

15 June 2007