Nortel Networks NN43001-504 User Manual
Page 133
Dropped calls
133
Message
Description
Action
No Host IP (Addr)
The wireless handset is
configured for static IP (as
opposed to use DHCP) and
no valid host IP address (the
wireless handset IP address) is
entered.
Enter a valid IP address in
the configuration settings or
change to use DHCP.
No IP Address
Invalid IP address.
Check the IP address of
the wireless handset and
reconfigure if required.
No Net Access
Cannot authenticate or
associate with AP.
Verify the AP configuration.
Verify that all the WEP settings
in the handset match those in
the APs.
No Net Found
This indicates any of the
following:
(For the WLAN Handsets
2210/2211/ 2212 only.)
•
No radio link
Verify that the AP is turned on.
•
No ESSID—Autolearn
not supported (or)
incorrect ESSID
Verify the ESSID of the wireless
LAN and enter or Autolearn it
again, if required.
•
AP does not support
appropriate data
ranges
Check the AP configuration
against the AP Configuration
Note.
•
Out of Range
Try getting closer to an AP.
Check to see if other handsets
are working within the same
range of an AP. If so, check the
ESSID of the handset.
•
Incorrect WEP settings
Verify that all the WEP settings
in the handset match those in
the APs.
•
Incorrect Security
settings
Verify that all the Security
setting in the AP.
No Net Found
This indicates any of the
following:
(For the WLAN Handsets
6120/6140 only.)
•
No radio link
Verify that the AP is turned on.
•
No ESSID—Autolearn
not supported (or)
incorrect SSID
Verify the SSID of the wireless
LAN and enter or Autolearn it
again, if required.
•
AP does not support
appropriate data
ranges
Check the AP configuration
against the AP Configuration
Note.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504
01.02
Standard
Release 5.0
15 June 2007
Copyright © 2004-2007, Nortel Networks
.