Polycom 400 - Manual (Page 57)

50 VocalData Telephone Features Polycom Telephone User Guide
621-00000092
Assigning Your Phone Number to Your Phone
When your phone is first installed, you may need to assign your
phone number to your phone. Your administrator should provide
both your phone number and a password to allow you to do this.
NOTE: Once you have assigned your phone number to your
phone, you may be required to change your password. If not, it
is recommended that you change it for security.
To assign your phone number:
1. Take the phone off-hook.
2. Enter your complete telephone number and press #.
3. Enter your password and press #.
4. Hang up the phone.
5. Wait for the phone to reboot.
6. When your telephone indicates that it is back online, you can
use the phone.
NOTE: If you don’t have a display or other indicator of phone
functionality, wait a minute or so and pick up the handset and
listen for dial tone. Once you hear dial tone, you can make and
receive calls.
NOTE: If you accidentally press more than one line button and
have the Phone Configurator active on multiple lines, finish the
assignment process on one of the lines. Any additional active
calls to the Phone Configurator are on hold. When the phone
becomes active, disconnect the held call.
IP Address/Phone Number Announcement
The IP address and phone number announcement feature of the
Phone Configurator function allows dialing an extension to hear the
IP address or phone number of the phone. This is especially useful