Polycom 400 - Manual (Page 53)

46 VocalData Telephone Features Polycom Telephone User Guide
621-00000092
• “Day” mode (or Mode 1) is defined by default as Monday -
Friday, 8:00 am to 5:00 pm.
• “Night” mode (Mode 2) is defined by default as Monday -
Friday, 5:01 pm - 7:59 am and all day Saturday and
Sunday.
These modes are defined by the service provider and can be
configured for different time periods. When the system is in Day
mode and has not been manuall switched, there is no label on the
phone display. If the system is in Night mode or the Night button has
been used to change the mode (either from Day to Night or Night to
Day), the word Night appears on the phone display.
Pressing the Night button to change modes will briefly display a
message of the selected mode. The easy way to tell which mode is
active is:
• If “Night” shows during the Day mode period, Night has
been activated.
• If “Night” shows during the Night mode period, Day has
been activated.
The Night feature has three states – normal, temporary or
permanent, which are changed when the Night button is pressed.
The states are shown on the phone display as follows:
• Normal = no stars (this means the display is blank in Day
mode and shows Night in Night mode
• Temporary = one star in front of the word Night (this
applies whether the mode was changed from Day to Night
or Night to Day)
• Permanent = two stars in front of the word Night (this
applies whether the mode was changed from Day to Night
or Night to Day)
These modes are defined by the service provider and can be
configured for different time periods.