Enabling/disabling call block, Blocking number of last call received, Adding numbers to call block list – Polycom 400 User Manual
Page 27
20
VocalData Telephone Features
Polycom Telephone User Guide
621-00000092
Enabling/Disabling Call Block
The PressOne system allows you to turn the Call Block feature on
and off (i.e., decide when calls from your list will be forwarded and
when they will ring at your telephone as usual). Disabling (turning
off) the feature does not delete the list of callers who are blocked
and receive the message.
1.
Press *60 or *80 on the telephone keypad.
•
A voice prompt tells you whether Call Block is enabled or
disabled and then gives the menu choices.
2.
Press 1 to enable Call Block if it is disabled or to disable the
feature if it is enabled.
Blocking Number of Last Call Received
1.
Press *60 or *80 on the telephone keypad.
A voice prompt tells you whether Call Block is enabled or
disabled and then gives the menu choices.
2.
Press 2 to add the number of the last call you received to the
blocked list.
You are returned to the Selective Call Forward menu.
3.
Select a menu item or hang up.
NOTE: Adding a number this way does not affect any numbers
already on your list, but simply adds the most recent caller to
your blocked list.
Adding Numbers to Call Block List
1.
Press *60 or *80.
2.
Press 3 to add telephone numbers to the list of numbers that
will be blocked.
3.
Enter the number with no spaces, dashes or special characters
followed by the # key.