Palm 700wx - Manual (Page 65)

U S I N G Y O U R P H O N E
M O R E W A Y S T O M A N A G E C A L L S 57
3
CH
AP
T
E
R
one of the calls has ended but the other
remains connected.
1 Press Phone/Send from the Active
Call screen.
2 Select Send Key (Flash) to enter Flash
mode.
3 Depending on the state of your active
call, pressing the Flash (left
action key) does one of the following:
• If you have two active calls, you can
swap between them if the second call
is an incoming call.
• If you have one active call, you can
dial another number. You can press
Flash
(left action key) again to
set up a conference call.
•
If you have two calls in conference,
press Flash
(left action key) to
hang up the second call, and then dial
another number.
4 Press Power/End to exit Flash
mode and end all calls.
Forwarding calls
You can forward calls to another phone
number. Please contact your wireless
provider for the code used to turn call
forwarding on or off. In addition, check with
your wireless provider about availability and
pricing of forwarded calls; additional
charges may apply.
1 Go to your Today screen.
2 Enter the code to turn on call forwarding
(contact your wireless provider for
details), followed by the number where
you want to forward your calls. For
example:
* 72 415-555-1234.
3 Press Phone/Send to dial.
4 When you’re ready to turn off call
forwarding, enter the code to turn off
call forwarding (contact your wireless
provider for details), and then press
Phone/Send
.
TIP Contact your wireless provider to obtain
the forwarding codes for your area.
After you turn on call forwarding, call your
smartphone to confirm that call forwarding is
active.