Turn off the voice command setting, Adjust the screen brightness, Adjust the automatic power off setting – Palm 700wx User Manual
Page 223: Screen, The screen appears blank

T R O U B L E S H O O T I N G
S C R E E N
215
10
CH
AP
T
E
R
Turn off the Voice Command setting
1 Press Start
and select Settings.
2 Select the Personal tab and then select
Voice Command
.
3 Uncheck the Enabled box.
4 Press OK
.
Reduce the amount of time the backlight
stays on when not in use
1 Press Start
and select Settings.
2 Select the System tab, and then select
Backlight.
3 Set the time interval on the Battery
Power tab and on the External Power
tab.
4 Press OK
.
Adjust the screen brightness
1 Press Option
, and then press
.
2 Press Left
and
Right to adjust the
brightness.
3 Press OK
.
Adjust the automatic power off setting
1 Press Start
and select Settings.
2 Select the System tab, and then select
Power
.
3 Select the Advanced tab and set
whether your smartphone turns off
automatically after a specified period of
inactivity while on battery power.
4 Press OK
to finish.
Screen
The screen appears blank
1 When the time period specified in
Backlight Settings expires, the screen
dims; one minute later, the screen
automatically turns off. Press any key
except Power/End to wake up the
screen. Pressing Power/End hangs up
the call.
2 Look closely at the screen. If you can
see a dim image, try adjusting the
screen brightness (see Adjusting the
brightness).
3 If that doesn’t work, perform a soft