Palm 700wx - Manual (Page 209)

C U S T O M I Z I N G Y O U R S M A R T P H O N E
C O N N E C T I O N S E T T I N G S 201
9
CH
AP
T
E
R
3 If the Multiple Networks Detected
dialog box appears, select the network
you want to connect to.
4 When the New Network Detected
dialog box appears, select the type of
network you want to connect to.
5 Press Connect (left action key) to
connect to the network.
6 If prompted, enter the password
provided by the system administrator.
Connecting to a closed network
Since closed networks have additional
security features, your smartphone cannot
detect the network’s settings; you must
obtain the settings from the system
administrator and enter the settings
manually. You can also use these steps to
manually create a connection with an open
network.
1 Wake up your smartphone’s screen (see
Waking up the screen and turning it off),
and then insert the Wi-Fi card into the
expansion slot (see Removing and
inserting expansion cards).
2 Tap Wi-Fi in the title bar.
3 Select the Settings link.
4 Select Network Cards .
5 Select Add New.
6 On the General tab, set the following:
Network name: Specifies the SSID
provided by the system administrator.
DID YOU KNOW ? You can conserve battery
power by removing the Wi-Fi card or turning
off a Wi-Fi connection when you are not
planning to use it for an extended period.
TIP The wired equivalent privacy (WEP)
encryption method is enabled by default and
may interfere with your ability to connect to a
network that broadcasts its name. See
Connecting to a closed network to learn how
to enable or disable WEP encryption.