Paradyne 3163 - Manual (Page 83)

Configuration Options
C-7 3163-A2-GB20-10 March 1999
Cross Connect
Configuration Options
Table C-3
(1 of 2)
Sync Data Port Assignment Options
Sync Data Port Assignment
Assign To: Network
Network
Network – Assigns this port to DS0 channels on the network interface. This is the only option on the single-port Model
3163 DSU/CSU.
Sync Data Port Assignments
Assign By: Block
Block ACAMI Channel
This configuration option designates the method for assigning DS0 channels to the destination T1 interface.
Block – Allocates DS0 channels to this port by the block method.
ACAMI – Allocates DS0 channels to this port by the Alternate Channel Alternate Mark Inversion method. The difference
between block and ACAMI is that the number of channels allocated with ACAMI is double the number needed for the port
rate. With ACAMI, every alternate DS0 channel does not carry data from the port but always transmits and receives all
ones.
Channel – Allocates DS0 channels to this port by the individual channel method.
NOTE: Changing this configuration option from one method to another (Block, ACAMI, or Channel) deallocates all DS0
channels assigned to the network interface.
Sync Data Port Assignments
Port Data Rate: 384
64 128 192 256 320 384 448 512 576 640 704 768 832 896 960 1024 1088 1152
1216 1280 1344 1408 1472 1536
OR
56 112 168 224 280 336 392 448 504 560 616 672 728 784 840 896 952 1008
1064 1120 1176 1232 1288 1344 Prev
Designates the data rate for the port. Available selections depend on the current base rate configured for the port. The
factory default for Nx64 is 384 kbps, and Nx56 is 336 kbps.
NOTES: This selection is not available if the individual channel allocation method (Channel) is selected using the Assign
By field.
Changing this selection from one rate to another deallocates all DS0 channels assigned to the network interface.